Complete wheel 23x8.50-12 BKT LG-306 6PR 7.00x12 ET0 steel grey RA 5 x 140mm
199,90 €
Complete wheel 23x8.50-12 BKT LG-306 6PR 7.00x12 ET0 steel grey RA 5 x 140mm
199,90 €
Shipping price from: 6,90 €
This item cannot be collected in person
Product Product in stock
Complete wheel 23x8.50-12 BKT LG-306 6PR 7.00x12 ET0 steel grey RA 5 x 140mm
Product.Nr.: 990016481
Manufacturer: BKT
This high-quality complete wheel from BKT is specially designed for use on garden and park maintenance machines. It combines the proven BKT tyre LG-306 in size 23x8.50-12 with a robust 7.00x12 steel rim in grey. The LG-306 tread ensures good traction while being gentle on lawns and green areas. Thanks to the tubeless (TL) design, the wheel is low-maintenance and ideally suited for continuous professional use.
Technical data
- Product type: Complete wheel
- Brand: BKT
- Industry: Garden and park maintenance
- Series: serie 48
- Tyre size: 23x8.50-12
- Diameter: 575 mm
- Width: 210 mm
- Tread: LG-306
- PR (Ply Rating): 6PR
- Rim size: 12 inch
- Tyre type: TL (Tubeless)
- Rim: 7.00x12
- Offset: ET0
- Rim design: 1-piece
- Bolt pattern: 94/140/5
- Load index (LI): 93
- Speed index (SI): A3
- Wheel material: Steel
- Rim colour: grey
- Max. load capacity: 650 kg
- Tyre pressure: 2.3 bar
- Max. speed: 15 km/h
Benefits and application
This complete wheel is ideal for ride-on mowers, garden tractors, municipal and maintenance machines used in gardens and parks. The LG-306 tread offers a good compromise between traction and ground protection, so that sensitive lawn surfaces are damaged as little as possible.
The 6PR carcass ensures high stability and a load capacity of up to 650 kg per wheel, allowing use even under more demanding conditions. The speed index A3 (up to 15 km/h) is perfectly matched to the typical operating speeds of garden and maintenance machines. Thanks to the 1-piece steel rim with bolt pattern 94/140/5 and offset ET0, the wheel is robust, durable and easy to install.
Explanation of technical terms
- TL (Tubeless): Indicates a tubeless tyre. The air is held directly between the tyre and the rim; a separate tube is not required.
- PR (Ply Rating): Indicates the load capacity class of the tyre carcass. 6PR means a reinforced construction for higher loads.
- Load index (LI): Numeric code for the maximum load capacity of a tyre. LI 93 corresponds here to a maximum load of 650 kg.
- Speed index (SI): Letter code for the permissible maximum speed of the tyre. A3 stands for a maximum speed of 15 km/h.
- Offset (ET): Distance between the rim centre and the mounting face on the hub. ET0 means that the mounting face is exactly in the middle of the rim width.
- Bolt pattern 94/140/5: Describes the bolt pattern of the rim (centre bore, pitch circle diameter, number of fixing holes) for correct mounting on the machine.
Frequently asked questions about this product
To find a suitable complete wheel, we need five pieces of information:
- Tyre size — shown on the sidewall of the old tyre, for example 195/50 R13.
- Number of holes and bolt circle diameter — how many wheel bolts and what is the bolt circle diameter. For a four-hole pattern, measure from the centre of one hole to the centre of the hole directly opposite. With a five-hole pattern, this isn’t possible directly because no hole is directly opposite — in this case, it helps to check the vehicle documents or a photo of the back of the rim.
- Offset (ET) — see below.
- Hub bore (centre hole) — the diameter of the opening in the centre of the rim.
- Load capacity — the load index must match the axle load, and must be at least the value stated in the vehicle documents.
What the offset (ET) does: It indicates how far the contact surface of the rim is from the centre of the rim, and thus determines how far the wheel protrudes outwards or inwards. An ET that is too small will cause the wheel to rub against the outer edge of the mudguard; one that is too large will cause it to rub against the brake or the frame on the inside.
Reading the offset: It is usually stamped on the inside of the rim, for example ‘ET30’. If there is no stamp, measure it yourself.
Measuring the ET yourself — here’s how:
- Remove the wheel and lay it flat, ideally with the outer side facing downwards.
- Measure the total width G of the rim: from the outer edge of one rim flange to the outer edge of the other. Half of this distance is the centre of the rim.
- Measure dimension A: place a straight ruler across the top rim flange and determine the distance from this edge to the hub contact surface — that is, to the surface that rests against the vehicle.
- Calculation: ET = A − G/2
Example: Total width 230 mm, measurement A 145 mm. Centre of the rim = 115 mm. ET = 145 − 115 = 30. A positive result means that the contact surface lies outside the centre of the rim — this is the normal case. A value of zero means it is exactly centred, whilst negative values indicate it lies further inwards.
The quickest way is still to take a photo of the back of the old rim — this shows the bolt pattern and usually the embossed dimensions as well.
To choose from: complete wheels.
Note: Our complete trailer wheels are not balanced — this is not usually necessary for car trailers.
Last viewed
Reviews marked “Verified Purchase” are from customers who have bought the product from our shop. Reviews without this label may also be from consumers who have not purchased the products in question. These have not been verified for authenticity.
E-Mail adress: info@bkt-tires.com
Streetaddress: Bhuj Plant, Survey No. 170-1/2
Address addition: Bhuj Taluka
ZIP Code: 370105
City: Gujarat
Country: IN
EU economic operator
Name: BKT Europe S.R.L.E-Mail adress: europe@bkt-tires.com
Streetaddress: Via Torricelli 6
ZIP Code: 46100
City: Mantova
Country: IT
Phone: +39 0376 391021
