Set of 2 4.00 - 10 complete wheel rim 3.50 x 10 LK 4x100 for car trailers
116,91 €
Shipping price from: 6,90 €
Product Product in stock
![]()
Set of 2 4.00 - 10 complete wheel rim 3.50 x 10 LK 4x100 for car trailers
Product.Nr.: 990014175
Manufacturer: KINGS TIRE
- 2 x 10 inch complete wheel
- Tyre size 4.00 x 10
- Tyre manufacturer: KINGS TIRE
- Tyre load capacity: 345 kg
- Load index: 71
- Speed index: N (up to 140kmh)
- Tyre type: TT
- Rim size: 3.50 x 10
- Rim manufacturer: Novio
- Rim load capacity: 325kg
- Wheel connection 4 hole
- Bolt circle 100 mm
- Centre hole 60 mm
- OFFSET 0
- suitable for tapered collar bolts / tapered collar nuts
- only suitable for car trailers
- Scope of delivery: 2 complete wheels
This 10-inch complete wheel with the dimensions 4.00 x 10 and a tyre load capacity of 345 kg each is the perfect choice for car trailers. It offers a reliable and stable solution for your trailer requirements.
The load index of 71 and the speed index of N (up to 140 km/h) ensure that this complete tyre meets the requirements of your trailer. The tyre type is TT (tubular tyre), which makes it easy to fit and maintain.
The rim has a size of 3.50 x 10 and a load capacity of 325 kg, which ensures additional stability and safety. The wheel connection consists of 4 holes with a bolt circle of 100 mm and a centre hole of 60 mm. The ET value is 0, which means that the rim is flush with the wheel hub.
These complete wheels are only suitable for car trailers and can be fastened with conical collar bolts or conical collar nuts. This set of 2 complete wheels is a high quality and reliable solution for anyone looking to improve the performance and safety of their trailer. It is supplied as a set so that you have both wheels for your trailer.
Frequently asked questions about this product
To find a suitable complete wheel, we need five pieces of information:
- Tyre size — shown on the sidewall of the old tyre, for example 195/50 R13.
- Number of holes and bolt circle diameter — how many wheel bolts and what is the bolt circle diameter. For a four-hole pattern, measure from the centre of one hole to the centre of the hole directly opposite. With a five-hole pattern, this isn’t possible directly because no hole is directly opposite — in this case, it helps to check the vehicle documents or a photo of the back of the rim.
- Offset (ET) — see below.
- Hub bore (centre hole) — the diameter of the opening in the centre of the rim.
- Load capacity — the load index must match the axle load, and must be at least the value stated in the vehicle documents.
What the offset (ET) does: It indicates how far the contact surface of the rim is from the centre of the rim, and thus determines how far the wheel protrudes outwards or inwards. An ET that is too small will cause the wheel to rub against the outer edge of the mudguard; one that is too large will cause it to rub against the brake or the frame on the inside.
Reading the offset: It is usually stamped on the inside of the rim, for example ‘ET30’. If there is no stamp, measure it yourself.
Measuring the ET yourself — here’s how:
- Remove the wheel and lay it flat, ideally with the outer side facing downwards.
- Measure the total width G of the rim: from the outer edge of one rim flange to the outer edge of the other. Half of this distance is the centre of the rim.
- Measure dimension A: place a straight ruler across the top rim flange and determine the distance from this edge to the hub contact surface — that is, to the surface that rests against the vehicle.
- Calculation: ET = A − G/2
Example: Total width 230 mm, measurement A 145 mm. Centre of the rim = 115 mm. ET = 145 − 115 = 30. A positive result means that the contact surface lies outside the centre of the rim — this is the normal case. A value of zero means it is exactly centred, whilst negative values indicate it lies further inwards.
The quickest way is still to take a photo of the back of the old rim — this shows the bolt pattern and usually the embossed dimensions as well.
To choose from: complete wheels.
Note: Our complete trailer wheels are not balanced — this is not usually necessary for car trailers.
Reviews marked “Verified Purchase” are from customers who have bought the product from our shop. Reviews without this label may also be from consumers who have not purchased the products in question. These have not been verified for authenticity.
E-Mail adress: kingstire@kingstire.com.cn
Streetaddress: Qiaosandao, Yangliuqing Xiqing, District Tianjin
ZIP Code: 300380
City: Tianjin
Country: CN
Phone: +86 (0)2227392536
EU economic operator
Name: Protempo GmbHE-Mail adress: info@protempo-online.de
Streetaddress: Wülfrather Straße 35
ZIP Code: 42553
City: Velbert-Tönisheide
Country: DE
Phone: +49 (0)28217483000