Offer valid until 31.10.26 While stocks last
 
Aluminium drive-on ramps – side view showing silver finish and dimensions of 3000mm length, 300mm width, 70mm height.
Aluminium ramps – side view showcasing non-slip surface and reinforced edges in silver and yellow.
Aluminium ramps – side view showing silver construction and non-slip surface with angled edge.
Aluminium ramps 2000 x 300 x 65mm – angled view showing silver aluminum construction and grooved surface.
Aluminium ramps 2000 x 300 x 65mm – side view showing silver color and curved edge design.
Aluminium ramps – detail view showing silver color and welded edge with cable attachment on a plain white background.
Aluminium ramps – top view showing ribbed silver surface and lightweight design, suitable for vehicles with rubber tracks.
Aluminium ramps – detail view showing silver ribbed surface and welded mounting hole on a plain white background.
Aluminium ramps – angled view showing silver ribbed surface and dimensions of 2000 x 300 x 65mm.

Aluminium drive-on ramps 3000 x 300 x 70mm 1400kg Loading ramps

446,31 € -10 % RRP 495,90 €

Cheapest price in the last 30 days: 495,90 €

 

Aluminium drive-on ramps 3000 x 300 x 70mm 1400kg Loading ramps

446,31 € -10 % RRP 495,90 €

Cheapest price in the last 30 days: 495,90 €

Shipping price from: 69,90 €

weight 35,00 KG

delivery time 3-4 Wochen

Product nicht lagernd

Aluminium drive-on ramps 3000 x 300 x 70mm 1400kg Loading ramps

Product.Nr.: 990014052

Manufacturer: JB Brandl ®

rating: 5.0 of 5
ALU loading rails / drive-on rails 3000 x 300 x 70mm Load capacity per pair of up to 1400kg, depending on the centre distance of the vehicle (min/max) drive-on height of 750-900mm Suitable for rubber tracked and pneumatic tyred vehicles Scope of delivery: 2 pieces = 1 pair + anti-slip protection Load with centre distance in kg 1000mm 1500mm > 2000mm 1240kg 1290kg 1410kg Thanks to the special aluminium profile, these ramps are very slip-resistant and suitable for many purposes, such as loading excavators, wheel loaders, motorbikes, machines, wheelbarrows, quads, etc. IN...
  more details   Downloads   Question ?   Have you seen it cheaper?
Aluminium drive-on ramps 3000 x 300 x 70mm 1400kg Loading ramps

  • ALU loading rails / drive-on rails
  • 3000 x 300 x 70mm
  • Load capacity per pair of up to 1400kg, depending on the centre distance of the vehicle
  • (min/max) drive-on height of 750-900mm
  • Suitable for rubber tracked and pneumatic tyred vehicles
  • Scope of delivery: 2 pieces = 1 pair + anti-slip protection

Load with centre distance in kg
1000mm 1500mm > 2000mm
1240kg 1290kg 1410kg

Thanks to the special aluminium profile, these ramps are very slip-resistant and suitable for many purposes, such as loading excavators, wheel loaders, motorbikes, machines, wheelbarrows, quads, etc.

INFO

The inclination of the ramps must not exceed an inclination of 30%, which corresponds to 16.5° according to the employers' liability insurance association.

The correct length of the ramps is determined as follows:

Height difference (in metres) : 30 x 100 = minimum required ramp length

 Bedienungsanleitung_990014052.pdf (1.44 MB)

The item can only post Germany be shipped

Frequently asked questions about this product

Our loading ramp calculator finds the right ramp for you in four steps: it determines the required ramp length from your loading edge height and the required load capacity from the vehicle weight and axle distance – and directly suggests suitable loading ramps from our range.

  1. Select your vehicle: mini excavator, tracked vehicle, wheel loader, forklift, car, motorcycle and more – including the type of undercarriage (rubber tracks, steel tracks or wheels). Steel tracks require specially designed ramps; the calculator takes this into account automatically.
  2. Enter the weight: what counts is the actual weight during loading – for excavators this includes the driver, attachments (bucket, hammer, grab) and fuel.
  3. Enter the axle distance: this determines how the weight is distributed on the ramps and what load capacity per pair is required.
  4. Measure the loading edge height: the calculator uses the height difference to determine the minimum ramp length.

Important: the ramp incline must not exceed 30% (approx. 16.5°) in accordance with occupational safety regulations. The minimum length is calculated as: height difference (m) : 30 × 100.

👉 Start the loading ramp calculator now

1/1 Reviews

All reviews Write a review

Verified purchase *

Wrote by Chris M. on 05.07.2025

👍

👍

Automatically translated · View original

Reviews marked “Verified Purchase” are from customers who have bought the product from our shop. Reviews without this label may also be from consumers who have not purchased the products in question. These have not been verified for authenticity.

Name: JB Brandl GmbH & Co. KG
E-Mail adress: service@a-e24.de
Streetaddress: Affinger Str. 6
ZIP Code: 86167
City: Augsburg
Country: DE
Phone: +49 (0)821-8068115-0