Aluminium ramps 2000 x 300 x 65mm 3200kg loading ramps
386,01 € -10 % RRP 428,90 €
add.Bulky goods surcharge 29,90 €
Cheapest price in the last 30 days: 428,90 €
Aluminium ramps 2000 x 300 x 65mm 3200kg loading ramps
386,01 € -10 % RRP 428,90 €
add.Bulky goods surcharge 29,90 €
Cheapest price in the last 30 days: 428,90 €
Shipping price from: 6,90 €
Product Produkt lagernd
Aluminium ramps 2000 x 300 x 65mm 3200kg loading ramps
Product.Nr.: 990004426
- ALU loading rails / ramp rails
- 2000 x 300 x 65mm
- Load capacity per pair of up to 3200kg , depending on the axle distance of the vehicle
- (min/max) drive-on height from 450-600mm
- suitable for vehicles with rubber tracks and pneumatic tyres
- Scope of delivery: 2 pieces = 1 pair + anti-slip device
Load at axle distance in Kg
| 750mm | 1000mm | > 1250mm |
| 3000kg | 3200kg | 3200kg |
Due to the special aluminium profile, these ramps are very slip-resistant and suitable for many purposes, such as loading, excavators, wheel loaders, motorcycles, machines, wheelbarrows, quads, etc.
INFO
The inclination of the ramps must not exceed 30%, which corresponds to 16.5° according to the Employer's Liability Insurance Association.
The correct length of the ramps is determined as follows:
Height difference(in meters) : 30 x 100 = minimum ramp length required
Bedienungsanleitung_990004426.pdf (1.43 MB)
| The item can only post Germany be shipped |
Frequently asked questions about this product
Our loading ramp calculator finds the right ramp for you in four steps: it determines the required ramp length from your loading edge height and the required load capacity from the vehicle weight and axle distance – and directly suggests suitable loading ramps from our range.
- Select your vehicle: mini excavator, tracked vehicle, wheel loader, forklift, car, motorcycle and more – including the type of undercarriage (rubber tracks, steel tracks or wheels). Steel tracks require specially designed ramps; the calculator takes this into account automatically.
- Enter the weight: what counts is the actual weight during loading – for excavators this includes the driver, attachments (bucket, hammer, grab) and fuel.
- Enter the axle distance: this determines how the weight is distributed on the ramps and what load capacity per pair is required.
- Measure the loading edge height: the calculator uses the height difference to determine the minimum ramp length.
Important: the ramp incline must not exceed 30% (approx. 16.5°) in accordance with occupational safety regulations. The minimum length is calculated as: height difference (m) : 30 × 100.
Wrote by Guest on 23.10.2016
Verified purchase *
Wrote by Guest on 09.03.2016
Everything is fine
Fast delivery, good goods, everything perfect.
Automatically translated · View original
Verified purchase *
Wrote by Guest on 13.05.2014
Drive-on rails from Brandl. Aluminium.
Everything is fine! As it should be.
Very good quality.
Automatically translated · View original
Reviews marked “Verified Purchase” are from customers who have bought the product from our shop. Reviews without this label may also be from consumers who have not purchased the products in question. These have not been verified for authenticity.
E-Mail adress: service@a-e24.de
Streetaddress: Affinger Str. 6
ZIP Code: 86167
City: Augsburg
Country: DE
Phone: +49 (0)821-8068115-0
