Aluminium drive-on ramps 2500 x 300 x 65mm 2600kg loading ramps
467,91 € -10 % RRP 519,90 €
Cheapest price in the last 30 days: 519,90 €
Aluminium drive-on ramps 2500 x 300 x 65mm 2600kg loading ramps
467,91 € -10 % RRP 519,90 €
Cheapest price in the last 30 days: 519,90 €
Shipping price from: 69,90 €
Product Produkt lagernd
Aluminium drive-on ramps 2500 x 300 x 65mm 2600kg loading ramps
Product.Nr.: 990004427
- ALU loading rails / ramp rails
- 2500 x 300 x 65mm
- Load capacity per pair of up to 2600kg , depending on the axle distance of the vehicle
- (min/max) drive-on height from 650-750mm
- suitable for vehicles with rubber tracks and pneumatic tyres
- Scope of delivery: 2 pieces = 1 pair + anti-slip device
Load at axle distance in Kg
| 750mm | 1000mm | > 1250mm |
| 2050kg | 2250kg | 2600kg |
Due to the special aluminium profile, these ramps are very slip-resistant and suitable for many purposes, such as loading, excavators, wheel loaders, motorcycles, machines, wheelbarrows, quads, etc.
INFO
The inclination of the ramps must not exceed 30%, which corresponds to 16.5° according to the Employer's Liability Insurance Association.
The correct length of the ramps is determined as follows:
Height difference(in meters) : 30 x 100 = minimum required ramp length
Bedienungsanleitung_990004427.pdf (1.43 MB)
| The item can only post Germany be shipped |
Frequently asked questions about this product
Our loading ramp calculator finds the right ramp for you in four steps: it determines the required ramp length from your loading edge height and the required load capacity from the vehicle weight and axle distance – and directly suggests suitable loading ramps from our range.
- Select your vehicle: mini excavator, tracked vehicle, wheel loader, forklift, car, motorcycle and more – including the type of undercarriage (rubber tracks, steel tracks or wheels). Steel tracks require specially designed ramps; the calculator takes this into account automatically.
- Enter the weight: what counts is the actual weight during loading – for excavators this includes the driver, attachments (bucket, hammer, grab) and fuel.
- Enter the axle distance: this determines how the weight is distributed on the ramps and what load capacity per pair is required.
- Measure the loading edge height: the calculator uses the height difference to determine the minimum ramp length.
Important: the ramp incline must not exceed 30% (approx. 16.5°) in accordance with occupational safety regulations. The minimum length is calculated as: height difference (m) : 30 × 100.
Verified purchase *
Wrote by Guest on 26.03.2016
Very good ramp for 65cm loading height
Use this 2.5m long ramp primarily for loading motorbikes (+/-200kg)
+ The width of 300mm is particularly helpful!
+ Parts are very non-slip
+ I had to reshape the supplied locking plates (vice) -> . now the ramps can no longer slip (plates are fixed positively between
. tailgate and frame). -> helps especially when unloading.
- The adhesive tape on the side came off after just one day. -> New if necessary...a highly reflective signalling foil / reflector would be better anyway
FINAL: Great ramp - I can only recommend it
Automatically translated · View original
Verified purchase *
Wrote by knuth l. on 04.01.2013
Wrote by Guest on 16.04.2021
Top ramps
Price performance fully in order, very fast delivery.
Would buy them again.
Automatically translated · View original
Reviews marked “Verified Purchase” are from customers who have bought the product from our shop. Reviews without this label may also be from consumers who have not purchased the products in question. These have not been verified for authenticity.
E-Mail adress: service@a-e24.de
Streetaddress: Affinger Str. 6
ZIP Code: 86167
City: Augsburg
Country: DE
Phone: +49 (0)821-8068115-0
