Wheel bearing set fit. f. Alko 2360 / 2361 DIN 32005 u 32007 incl. sealing ring
24,89 €
Wheel bearing set fit. f. Alko 2360 / 2361 DIN 32005 u 32007 incl. sealing ring
24,89 €
Shipping price from: 6,90 €
Product Produkt lagernd
Wheel bearing set fit. f. Alko 2360 / 2361 DIN 32005 u 32007 incl. sealing ring
Product.Nr.: 990010052
- Wheel bearing bearing set suitable for Alko
- suitable for Al-ko brake drums with cone roller bearings
- for wheel brake type 2360 and 2361
- Wheel bearing with DIN no. 32005, 47/25 x 11.5mm (outer diameter / inner diameter x width)
- Wheel bearing with DIN no. 32007, 62/35 x 14mm (outer diameter / inner diameter x width)
- Hub seal, 62/42 x 7mm (outer diameter / inner diameter x width)
Articles, parts, originals and order numbers are for comparison purposes only and are not designations of origin. Names, trademarks or brand names are only mentioned for the purpose of identifying our products.
Frequently asked questions about this product
Check the wheel bearings: Jack up the wheel, hold it at the top and bottom and wiggle it, then turn the wheel. A very slight amount of play, just noticeable to the touch, is normal. Significant play, grinding noises or rough running mean you should check the bearings and, in most cases, replace them.
With tapered roller bearings, the play can be adjusted via the axle nut. Compact wheel bearing units are not adjustable and must be replaced in their entirety.
Grease: With conventional tapered roller bearings, the grease is replaced at longer service intervals — wash out the old grease, check the bearings, and refill with new grease. Contaminated or water-contaminated grease is the most common cause of bearing damage, particularly on boat trailers.
Brake drum: When opening the brake, check for cracks, grooves and the internal diameter. Drums that are severely worn or have a blue tinge (overheated) must be replaced. A warped drum will also be noticeable — the trailer will then brake in a pulsating manner. Wipe out brake dust rather than blowing it out.
Rule of thumb: Whenever you change the brake shoes, check the bearings and drum at the same time — the wheel hub is already off, and removing it a second time takes longer than the cost of the spare part.
Replacement: Wheel bearings and brake drums.
Reviews marked “Verified Purchase” are from customers who have bought the product from our shop. Reviews without this label may also be from consumers who have not purchased the products in question. These have not been verified for authenticity.
E-Mail adress: info@schlegl-gmbh.de
Streetaddress: Bellstraße 2 B
ZIP Code: 92421
City: Schwandorf
Country: DE
Phone: +49 (0)94318834100
