Brake drum suitable for BPW S 2304-7 RASK with ECO bearing 34/64x37, 5 x 112
144,89 €
Brake drum suitable for BPW S 2304-7 RASK with ECO bearing 34/64x37, 5 x 112
144,89 €
Shipping price from: 6,90 €
Product Product in stock
Brake drum suitable for BPW S 2304-7 RASK with ECO bearing 34/64x37, 5 x 112
Product.Nr.: 990014804
- Brake drum suitable for BPW
- suitable for BPW wheel brake 230 x 40mm
- Wheel brake type S 2304-7 RASK
- bolt circle 112 x 5 for 5 hole rims
- incl. compact bearing 34/64 x 37mm (inner diameter / outer diameter x width)
- Casting number / reference numbers: 01.274.07.06.0, 0127407060
This brake drum is designed for BPW wheel brake systems with a size of 230 x 40 mm and is suitable for wheel brake type S 2304-7 RASK. It has a bolt circle of 112 mm with 5 mounting holes, suitable for corresponding rims. The compact bearing included in the scope of delivery has the dimensions 34/64 x 37 mm (inner diameter/outer diameter x width). The brake drum corresponds to the casting number 01.274.07.06.0 and is known under the reference number 0127407060.
Frequently asked questions about this product
Check the wheel bearings: Jack up the wheel, hold it at the top and bottom and wiggle it, then turn the wheel. A very slight amount of play, just noticeable to the touch, is normal. Significant play, grinding noises or rough running mean you should check the bearings and, in most cases, replace them.
With tapered roller bearings, the play can be adjusted via the axle nut. Compact wheel bearing units are not adjustable and must be replaced in their entirety.
Grease: With conventional tapered roller bearings, the grease is replaced at longer service intervals — wash out the old grease, check the bearings, and refill with new grease. Contaminated or water-contaminated grease is the most common cause of bearing damage, particularly on boat trailers.
Brake drum: When opening the brake, check for cracks, grooves and the internal diameter. Drums that are severely worn or have a blue tinge (overheated) must be replaced. A warped drum will also be noticeable — the trailer will then brake in a pulsating manner. Wipe out brake dust rather than blowing it out.
Rule of thumb: Whenever you change the brake shoes, check the bearings and drum at the same time — the wheel hub is already off, and removing it a second time takes longer than the cost of the spare part.
Replacement: Wheel bearings and brake drums.
Recommended accessories / spare parts
Reviews marked “Verified Purchase” are from customers who have bought the product from our shop. Reviews without this label may also be from consumers who have not purchased the products in question. These have not been verified for authenticity.
E-Mail adress: service@a-e24.de
Streetaddress: Affinger Str. 6
ZIP Code: 86167
City: Augsburg
Country: DE
Phone: +49 (0)821-8068115-0
