Rim strip / rim tape 6.00/6.50/7.00/7.50-16 16 inch
16,90 €
Rim strip / rim tape 6.00/6.50/7.00/7.50-16 16 inch
16,90 €
Shipping price from: 6,90 €
This item cannot be collected in person
Product Product in stock
Rim strip / rim tape 6.00/6.50/7.00/7.50-16 16 inch
Product.Nr.: 990017437
Manufacturer: Novio
This bead strip / rim tape reliably protects the tube from damage caused by spoke heads, edges and irregularities in the rim bed. It is mounted between rim and tube and ensures that the tube remains safe and durable even under high loads and during long-term use. Thanks to its matched width and size, this tape is suitable for several common tyre sizes on 16-inch rims.
Technical data
- Product type: bead strip / rim tape
- Tyre size: 6.00/6.50/7.00/7.50-16
- Rim size: 16 inch
Benefits and application
This bead strip / rim tape is ideal for all applications where tubes are used in 16-inch rims and reliable protection against mechanical damage is required. It helps to prevent tyre damage and sudden loss of air, thereby increasing the operational safety of the entire wheel assembly.
Typical areas of use are vehicles and machines that use tyre sizes 6.00-16, 6.50-16, 7.00-16 or 7.50-16, for example in agriculture, on trailers, commercial vehicles or classic cars. Designed for several tyre sizes, the tape is flexible in use and simplifies stockkeeping in workshops or fleet operations.
Frequently asked questions about this product
The valve designation describes two things: the stem diameter — which must fit the hole in the rim — and the shape, i.e. straight or angled.
Only the bore matters for a proper fit: a valve fits perfectly only if its stem matches the bore in the rim. Whether it is straight or angled makes no difference — that is a question of accessibility.
An overview of the types:
| Type | Shape | Bore | typically used for |
|---|---|---|---|
| TR13 | straight, rubber | 11.5 mm | Car and trailer wheels |
| TR4 / TR6 | straight, short | 11.5 mm | Small wheels, garden tools |
| TR15 | straight, rubber | 16 mm | Agricultural machinery, tractor rims |
| TR87 | 90° angled | 11.5 mm | Small wheels, solid rims |
| JS8 (DIN 7777) | 90° angled, same as TR87 | 11.5 mm | small wheels, solid rims |
| JS2 | Approx. 70° angled | 11.5 mm | Industrial and small wheels |
| V3-02-7 (TR75) | 100° single-bend metal angle valve with screw-on base | 12.2 mm | Commercial vehicles, lorries, trailers, agricultural and industrial machinery such as forklift trucks |
| V3-06-3 | Triple-bend brass truck screw-on valve (90°/139°/139°) | 9.7 mm | 20-inch truck and trailer tubes (6.00-20 to 9.00-20), also 22.5-inch tube-type tyres |
| TR218A | Straight metal air-water valve, two-piece | 15.9–16 mm | High-volume tubular tyres for agricultural and industrial use, tractors |
V3-02-7 in detail: Also known as ETRTO V3.02.7 and US designation TR75. Dimensions: Horizontal leg length 22.5 mm, vertical leg length 71.5 mm, total height approx. 91 mm. The valve base is screwed on, not pressed in — this makes it significantly more robust than a rubber valve.
V3-06-3 in detail: Also known as ETRTO V3.06.3. Triple-bend brass screw-on truck valve: the first bend is 90°, the other two 139° each — this guides the filling end past the rim flange and keeps it accessible even with twin tyres and deep rim wells. Leg dimensions approx. 20.5 / 46 / 20.5 / 47.5 mm (approx. 135 mm developed length), rim hole 9.7 mm. The valve is fastened to the tube with a sealing washer and nut instead of being vulcanised in. In our range on the 20-inch tubes 6.00/6.50-20, 7.00/7.50-20, 8.25-20 and 9.00-20.
TR218A in detail — the valve for water ballast: What makes this type special is the option for liquid ballasting: the hose is partially filled with water to increase the vehicle’s weight and thus improve traction — a common practice with tractors.
- Design: straight, robust metal valve, usually in two parts. Unscrewing the inner CH3 valve insert creates an extra-large opening — allowing for quick filling with air or liquid.
- Rim bore: 15.9 to 16 mm (0.625 inches).
- Length: typically around 38 to 48 mm total height above the rim.
- Mounting: a rubber base approximately 80 mm in diameter for vulcanising onto the inner tube, plus a lock nut for secure attachment to the rim.
Reducing sleeves: A TR15 valve does not fit into an 11.5 mm bore. Conversely, there are sleeves that allow a TR13 valve to fit into a 16 mm bore.
Whether straight or angled is not a question of fit, but of accessibility: with closed rims or small wheels, it is often impossible to reach the valve with a pump using a straight valve — in which case an angled one is used.
Not sure which valve is fitted? A photo of the old valve is all we need to identify it. Choose from: inner tubes, bead tapes and valves.
Reviews marked “Verified Purchase” are from customers who have bought the product from our shop. Reviews without this label may also be from consumers who have not purchased the products in question. These have not been verified for authenticity.
E-Mail adress: info@protempo-online.de
Streetaddress: Wülfrather Straße 35
ZIP Code: 42553
City: Velbert-Tönisheide
Country: DE
Phone: +49 (0)28217483000
