This robust steel rim from FAD wheels, series 48, is designed for demanding industrial and garden applications. With its sturdy 1-piece design and a load capacity of 650 kg at up to 40 km/h, it is ideal for equipment and trailers that must operate reliably in professional use. The grey finish blends discreetly into many machine and vehicle designs.

Technical data

• Brand: FAD wheels
• Series: serie 48
• Rim: 5Jx14H2
• Inch size: 14
• Offset (ET): ET0
• 1/2/3-piece: 1-piece
• Mounting pattern: 94/140/5
• Back centre hole: 18.5 R14, ball seat
• Valve hole: 11.3 +0.4
• Rim material: steel
• Rim colour: grey
• Max. speed: 40 km/h
• Load capacity kg at 40 km/h: 650 kg
• Load capacity: 650 kg
• Remark: Note, shade of grey varies

Benefits and application

This steel rim is specially designed for use on industrial trailers, agricultural equipment, garden and municipal machinery. Thanks to the high load capacity of 650 kg, it is suitable for heavy loads and continuous daily operation. The mounting pattern 94/140/5 allows installation on matching hubs with the corresponding bolt circle, while the back centre hole with ball seat ensures a secure fit of the wheel bolts.

The steel construction provides high stability and durability, even under harsh conditions. With a maximum speed of 40 km/h, the rim is optimally suited for slow-moving vehicles and work machines. The grey paint finish is robust and practical; the shade of grey may vary slightly depending on the production batch, which does not affect the function.

Explanation of technical terms

• ET (offset): Distance between the centreline of the rim and the mounting face on the hub. ET0 means that the mounting face is in the middle of the rim width. This influences how far the wheel sits inwards or outwards in the wheel arch.
• Mounting pattern: Combination of centre bore, bolt circle and number of fixing holes. For the size 94/140/5 this typically stands for the relevant diameters and 5 fixing holes.
• 5Jx14H2: Indicates rim width (5 inches), rim profile (J), diameter (14 inches) and hump design (H2) for better retention of the tyre on the rim.
• Back centre hole 18.5 R14, ball seat: Describes the central hole and the seat of the wheel nuts or bolts. Ball seat means that the nuts have a spherical contact surface.
• Valve hole 11.3 +0.4: Diameter of the hole for the valve, here for standard snap-in valves with approx. 11.3 mm design.
• Load capacity: Maximum load that the rim can safely carry at the specified speed (here 40 km/h).