This one-piece steel rim 3.50Bx10H2 in grey is designed for robust use in industrial and garden applications. With a rim size of 10 inches and a mounting dimension of 60/100/4, it is ideal for various machines, trailers or equipment where high load capacity and reliable running accuracy are required. The rim is rated for speeds up to 140 km/h and, with a load capacity of 400 kg, provides a solid basis for demanding applications.

Technical data

• Series: Series 58
• Rim: 3.50Bx10H2
• Rim size: 10
• Offset (ET): ET-2.1
• Design: 1-piece
• Mounting dimension: 60/100/4 (centre bore/bolt circles/4-hole rim)
• Material thickness: 2.3 mm
• Max. speed: 140 km/h
• Back hole: 16 conical seat 60°
• Valve hole: 11.5 mm +/- 0.2 mm
• Rim material: steel
• Rim colour: grey
• Load capacity: 400 kg

Advantages and application area

Thanks to its material thickness of 2.3 mm, this steel rim is particularly robust and durable. The load capacity of 400 kg allows use on trailers, work machines, industrial and garden equipment where high loads must be safely supported. The rating up to 140 km/h also enables use close to road traffic, for example on transport trailers or service vehicles.

The mounting dimension 60/100/4 ensures secure and precise fitting on matching hubs. The 60° conical seat in the back hole ensures a firm fit of the wheel bolts. The grey coating makes the rim resistant to dirt and allows it to blend discreetly into a wide range of vehicle and equipment designs.

Explanation of technical terms

• ET (offset): Distance between the centre of the rim and the contact surface on the hub. ET-2.1 means that the contact surface is slightly offset to the outside, which influences the position of the wheel in the wheel arch.
• Mounting dimension 60/100/4: Describes the centre bore and bolt circles of the rim. 60 stands for the diameter of the centre bore in mm, 100 for the pitch circle diameter in mm, 4 for the number of fixing holes.
• 1-piece: The rim consists of a single, closed component and is neither bolted together nor split.
• Back hole 16 conical seat 60°: Bore for wheel fastening with a conical seat (taper seat) of 60°, suitable for corresponding wheel bolts or nuts.
• Valve hole 11.5 +/-0.2 mm: Bore for the tyre valve, here for standard valves with approx. 11.5 mm diameter.
• Rim size 10: Denotes the rim diameter in inches and must match the tyre diameter.