Complete wheel 18x8.50-8 KINGS TIRE V-3501 6PR Series 58 wheel mounting 4 x 100mm
131,90 €
Complete wheel 18x8.50-8 KINGS TIRE V-3501 6PR Series 58 wheel mounting 4 x 100mm
131,90 €
Shipping price from: 6,90 €
This item cannot be collected in person
Product Produkt lagernd
Complete wheel 18x8.50-8 KINGS TIRE V-3501 6PR Series 58 wheel mounting 4 x 100mm
Product.Nr.: 990016445
Manufacturer: KINGS TIRE
This complete wheel from KINGS TIRE is specially designed for use in garden and park maintenance. It combines the V-3501 tyre in size 18x8.50-8 with a robust grey steel rim. Thanks to its 6PR construction and a load capacity of up to 320 kg, the wheel is ideal for ride-on mowers, garden tractors, trailers and other equipment carriers that must be moved reliably and safely at low speeds.
Technical data
- Brand: KINGS TIRE
- Industry: Garden and park maintenance
- Item: Complete wheel
- Series: Series 58
- Tyre size: 18x8.50-8
- Diameter: 442 mm
- Width: 213 mm
- Tread pattern: V-3501
- PR (Ply Rating): 6PR
- Rim size: 8 inch
- Tyre type: TL (Tubeless)
- Rim: 7.00Bx8H2
- Offset: ET-2
- 1/2/3-piece: 1-piece
- Bolt pattern: 60/100/4
- Material thickness: 2.0 mm
- Speed index (SI): A3
- Wheel material: Steel
- Rim colour: Grey
- Max. load capacity: 320 kg
- Max. speed: 15 km/h
Benefits and applications
This complete wheel is designed for low driving speeds up to 15 km/h and therefore offers high operational safety on typical garden and municipal machines. The V-3501 tread provides good grip on grass, soil and light off-road terrain without unnecessarily damaging the turf. The 6PR construction stands for a reinforced carcass and thus higher stability under load.
The one-piece steel rim with 2.0 mm material thickness is robust and durable. The bolt pattern 60/100/4 enables a precise fit on many common machines in the garden and park maintenance sector. Thanks to the tubeless (TL) design, no separate tube is required, which reduces maintenance effort and potential sources of failure.
Typical applications include ride-on mowers, garden tractors, small trailers and various work equipment used in municipal and private green space management.
Explanation of technical terms
- TL (Tubeless): Tubeless tyre that seals directly on the rim. No separate tube is required.
- PR (Ply Rating): Indicates the load capacity class of the tyre. 6PR means a reinforced carcass and higher load capacity compared to lower PR values.
- Speed index (SI): Indicates the maximum permissible speed of the tyre. A3 stands for a maximum speed of 15 km/h.
- Offset (ET): Distance between the centre of the rim and the contact surface of the rim on the hub. ET-2 means that the rim is slightly offset outwards.
- Bolt pattern 60/100/4: Describes the hub bore and bolt circle of the rim (centre bore, bolt circle and number of fixing holes).
Frequently asked questions about this product
To find a suitable complete wheel, we need five pieces of information:
- Tyre size — shown on the sidewall of the old tyre, for example 195/50 R13.
- Number of holes and bolt circle diameter — how many wheel bolts and what is the bolt circle diameter. For a four-hole pattern, measure from the centre of one hole to the centre of the hole directly opposite. With a five-hole pattern, this isn’t possible directly because no hole is directly opposite — in this case, it helps to check the vehicle documents or a photo of the back of the rim.
- Offset (ET) — see below.
- Hub bore (centre hole) — the diameter of the opening in the centre of the rim.
- Load capacity — the load index must match the axle load, and must be at least the value stated in the vehicle documents.
What the offset (ET) does: It indicates how far the contact surface of the rim is from the centre of the rim, and thus determines how far the wheel protrudes outwards or inwards. An ET that is too small will cause the wheel to rub against the outer edge of the mudguard; one that is too large will cause it to rub against the brake or the frame on the inside.
Reading the offset: It is usually stamped on the inside of the rim, for example ‘ET30’. If there is no stamp, measure it yourself.
Measuring the ET yourself — here’s how:
- Remove the wheel and lay it flat, ideally with the outer side facing downwards.
- Measure the total width G of the rim: from the outer edge of one rim flange to the outer edge of the other. Half of this distance is the centre of the rim.
- Measure dimension A: place a straight ruler across the top rim flange and determine the distance from this edge to the hub contact surface — that is, to the surface that rests against the vehicle.
- Calculation: ET = A − G/2
Example: Total width 230 mm, measurement A 145 mm. Centre of the rim = 115 mm. ET = 145 − 115 = 30. A positive result means that the contact surface lies outside the centre of the rim — this is the normal case. A value of zero means it is exactly centred, whilst negative values indicate it lies further inwards.
The quickest way is still to take a photo of the back of the old rim — this shows the bolt pattern and usually the embossed dimensions as well.
To choose from: complete wheels.
Note: Our complete trailer wheels are not balanced — this is not usually necessary for car trailers.
Reviews marked “Verified Purchase” are from customers who have bought the product from our shop. Reviews without this label may also be from consumers who have not purchased the products in question. These have not been verified for authenticity.
E-Mail adress: kingstire@kingstire.com.cn
Streetaddress: Qiaosandao, Yangliuqing Xiqing, District Tianjin
ZIP Code: 300380
City: Tianjin
Country: CN
Phone: +86 (0)2227392536
EU economic operator
Name: Protempo GmbHE-Mail adress: info@protempo-online.de
Streetaddress: Wülfrather Straße 35
ZIP Code: 42553
City: Velbert-Tönisheide
Country: DE
Phone: +49 (0)28217483000
