Complete wheel 16x6.50-8 KINGS TIRE V-3503 Series 58 steel rim RA 4 x 100mm
65,90 €
Complete wheel 16x6.50-8 KINGS TIRE V-3503 Series 58 steel rim RA 4 x 100mm
65,90 €
Shipping price from: 6,90 €
This item cannot be collected in person
Product ei varastossa
Currently not available for order
Complete wheel 16x6.50-8 KINGS TIRE V-3503 Series 58 steel rim RA 4 x 100mm
Product.Nr.: 990016681
Manufacturer: KINGS TIRE
This complete wheel from KINGS TIRE, Series 58, is specially designed for agricultural and horticultural applications. It combines the robust 16x6.50-8 tyre with a matching steel rim and offers reliable grip, good traction and stable load capacity at low speeds. Ideal for equipment such as garden tractors, trailers, yard and small machines that are used daily on meadows, fields or yard areas.
Technical data
- Brand: KINGS TIRE
- Industry: Agriculture and horticulture
- Item: Complete wheel
- Series: Series 58
- Tyre size: 16x6.50-8
- Diameter: 406 mm
- Width: 162 mm
- Tread pattern: V-3503
- PR (Ply Rating): 4PR
- Inch size: 8 inch
- Tyre type: TT (Tube Type)
- Rim: 5.50x8H2
- Offset: ET-2
- 1/2/3-piece: 1-piece
- Bolt pattern: 60/100/4
- Material thickness: 2.0 mm
- Wheel material: Steel
- Rim colour: grey
- Max. load capacity: 280 kg
- Tyre pressure: 2.5 bar
- Max. speed: 20 km/h
Advantages and application
The V-3503 tread pattern ensures good grip on grass, soil and firm surfaces and enables controlled handling at low speeds. With a maximum load capacity of 280 kg, this complete wheel is suitable for many light to medium transport and work tasks in gardening and agriculture.
The robust 1-piece steel rim with 2.0 mm material thickness and grey coating is durable and long-lasting. The bolt pattern 60/100/4 allows mounting on suitable axles and hubs as commonly used on many machines in gardening and municipal applications. As a TT tyre (tube type), the wheel is particularly service-friendly, as tube changes and repairs can be carried out easily.
Typical fields of application are garden tractors, lawn tractors, small trailers, service carts, yard and municipal equipment as well as various machines in light agricultural use, where low speed (up to 20 km/h) and high stability are the main focus.
Explanation of technical terms
- TT (Tube Type): Tyre construction for use with a separate inner tube.
- PR (Ply Rating): Index for the load capacity class of the tyre. 4PR indicates a reinforced version for higher load capacity.
- Inch size: Indicates the rim diameter in inches (here 8 inch).
- Offset (ET): Distance between the rim centre and the contact surface of the rim on the hub. ET-2 means a slightly outward-offset rim.
- Bolt pattern 60/100/4: Pitch circle and hub dimensions for mounting the wheel (centre bore, pitch circle, number of fixing holes).
Frequently asked questions about this product
To find a suitable complete wheel, we need five pieces of information:
- Tyre size — shown on the sidewall of the old tyre, for example 195/50 R13.
- Number of holes and bolt circle diameter — how many wheel bolts and what is the bolt circle diameter. For a four-hole pattern, measure from the centre of one hole to the centre of the hole directly opposite. With a five-hole pattern, this isn’t possible directly because no hole is directly opposite — in this case, it helps to check the vehicle documents or a photo of the back of the rim.
- Offset (ET) — see below.
- Hub bore (centre hole) — the diameter of the opening in the centre of the rim.
- Load capacity — the load index must match the axle load, and must be at least the value stated in the vehicle documents.
What the offset (ET) does: It indicates how far the contact surface of the rim is from the centre of the rim, and thus determines how far the wheel protrudes outwards or inwards. An ET that is too small will cause the wheel to rub against the outer edge of the mudguard; one that is too large will cause it to rub against the brake or the frame on the inside.
Reading the offset: It is usually stamped on the inside of the rim, for example ‘ET30’. If there is no stamp, measure it yourself.
Measuring the ET yourself — here’s how:
- Remove the wheel and lay it flat, ideally with the outer side facing downwards.
- Measure the total width G of the rim: from the outer edge of one rim flange to the outer edge of the other. Half of this distance is the centre of the rim.
- Measure dimension A: place a straight ruler across the top rim flange and determine the distance from this edge to the hub contact surface — that is, to the surface that rests against the vehicle.
- Calculation: ET = A − G/2
Example: Total width 230 mm, measurement A 145 mm. Centre of the rim = 115 mm. ET = 145 − 115 = 30. A positive result means that the contact surface lies outside the centre of the rim — this is the normal case. A value of zero means it is exactly centred, whilst negative values indicate it lies further inwards.
The quickest way is still to take a photo of the back of the old rim — this shows the bolt pattern and usually the embossed dimensions as well.
To choose from: complete wheels.
Note: Our complete trailer wheels are not balanced — this is not usually necessary for car trailers.
Last viewed
Reviews marked “Verified Purchase” are from customers who have bought the product from our shop. Reviews without this label may also be from consumers who have not purchased the products in question. These have not been verified for authenticity.
E-Mail adress: kingstire@kingstire.com.cn
Streetaddress: Qiaosandao, Yangliuqing Xiqing, District Tianjin
ZIP Code: 300380
City: Tianjin
Country: CN
Phone: +86 (0)2227392536
EU economic operator
Name: Protempo GmbHE-Mail adress: info@protempo-online.de
Streetaddress: Wülfrather Straße 35
ZIP Code: 42553
City: Velbert-Tönisheide
Country: DE
Phone: +49 (0)28217483000
