This one-piece plastic rim in size 2.10x4 is equipped with a robust ball bearing and is ideal for industrial, transport and garden applications. Thanks to the hub length of 75 mm and the axle bore with ball bearing Ø25 mm, the rim can be easily mounted on suitable axle systems. The red plastic design is corrosion-resistant, lightweight and still stable enough for demanding use at low speeds.

Technical data

• Product name: 2.10x4 Ball Bearing Ø25 NL75mm Plastic Red
• Item: Wheel
• Series: Series 52
• Inch size: 4 inch
• Rim: 2.10x4
• 1/2/3-piece: 1-piece
• Designation: Ball bearing
• Axle bore Ø mm: Ball bearing Ø25
• Hub length mm: NL75 mm
• Bearing type: 6005 2RS C3
• Tube diameter: 47 mm
• Hole diameter: Ø25 mm
• Bearing width: 12 mm
• Rim material: Plastic
• Rim colour: Red
• Max. load capacity: 200 kg
• Tyre pressure: 2.5 bar
• Max. speed: 10 km/h

Advantages and applications

This rim is designed for applications with moderate speeds up to 10 km/h, such as hand trucks, garden equipment, transport trolleys or light industrial carts. The sealed ball bearing (type 6005 2RS C3) ensures smooth, easy running and is protected against dirt and moisture. The maximum load capacity of 200 kg also makes the rim suitable for more heavily loaded carts and equipment.

The plastic material of the rim is resistant to corrosion and many environmental influences and offers low weight – ideal where weight reduction and low maintenance are required. Thanks to the standardised dimensions of axle bore, hub length and tube diameter, the rim can be easily replaced or retrofitted in many existing systems.

Explanation of technical terms

• Ball bearing: Rolling bearing in which balls between inner and outer ring ensure particularly smooth running.
• 6005 2RS C3: Designation of the ball bearing. “6005” stands for the bearing size, “2RS” for double rubber seal (protected against dust and moisture) and “C3” for increased internal clearance, suitable for higher loads and temperature changes.
• Max. load capacity: The maximum permissible static load that the component can safely support.
• Tyre pressure: Recommended operating pressure of the corresponding tyre in bar.
• Hub length (NL): Total length of the hub, important for the fit on the axle and between fork or frame.
• Axle bore / hole diameter: Diameter of the bore for the axle; must match the axle diameter.
• Tube diameter: Outside diameter of the hub tube, relevant for the design and fit in the vehicle or equipment.